2 images from Leatherman.
Skeletool CX
A 142 g seven-tool frame cut back to pliers, wire cutters, a bit driver and a 66 mm 154CM blade, with two bits stored in the handle. The blade runs 58-60 HRC against the 55-59 HRC of the 420HC used across most of the range. Its cutters are not the replaceable inserts fitted to the Wave Plus and Surge.
Specs verified 2026-09-30 · 1 source · 5 fields we could not verify, shown as —
Full specification
- Weight
- 142 g
- Weight (imperial)
- 5.0 oz
- Closed length
- 101.6 mm
- Closed length (imperial)
- 4.00 in
- Open length
- 152.4 mm
- Width
- 31.5 mm
- Thickness
- 13.2 mm
- Manufacturer
- Leatherman
- Product family
- Skeletool
- Release year
- —
- Status
- In production
- Country of manufacture
- —
- Tool count (manufacturer)
- 7
- Cost per tool
- $14.28
- Warranty
- 25-year warranty
- Blade steel
- 154CM58-61 HRCA genuine step up from 420HC. Holds a working edge several times longer and still resists rust well.average edge lifereasonably rust-resistantsharpens with effortHarder to bring back once it is properly dull. A diamond stone helps. Editorial guidance, not a measured specification. Datasheet
- Blade length
- 66 mm
- Edge type
- plain
- Blade profile
- Modified Drop Point
- Locking
- Yes
- One-hand opening
- Yes
- Outside accessible
- Yes
- Pliers type
- both
- Wire cutters
- Yes
- Replaceable cutters
- No
- Hard-wire cutters
- Yes
- Crimper
- —
- Pocket clip
- Yes
- Lanyard attachment
- —
- Sheath included
- No
- Included bits
- Phillips #1 & #2 · Screwdriver 1/4" & 3/16"
As listed on leatherman.com for SKU 833550, checked 2026-09-30. Contents vary by SKU and change over time.
Tool inventory · 9 mapped · 7 counted by Leatherman
Needlenose Pliers · Regular Pliers · Wire Cutters · Hard-wire Cutters · 154CM Knife · Carabiner/Bottle Opener · Large Bit Driver
What reviewers report
Several reviewers praise the secure pocket clip, 154CM blade steel, one-handed operation, slim profile, and high build quality. The tool is consistently described as lightweight and well-finished. Three reviewers criticize the high price relative to function or competitors.
Based on 7 sources from 7 independent contributors (6 video, 1 reddit). A report is recurring when three people mention it or when it appears across both platforms.
-
Pocket clip allows for comfortable and secure carry 5 · recurring
“it carries easily in the pocket” River's Edge Cutlery · video
“it sits very nicely in the pocket when you're carrying it” David Jaski · video
“You can easily clip it onto things, clip it on your bags, clip it on to your belt loop” DFQ Reviews · video
“the pocket clips um it's a good pocket clip” Cedric & Ada Gear and Outdoors · video
“I loved the clip” u/loogojoost · reddit
-
Blade steel is 154CM and holds an edge well 4 · recurring
“154 cm is a good to go kind of Steal I got no problem with it at all” Nick Shabazz · video
“they are actually using knife Steel in this multi-tool this is 154 CM” River's Edge Cutlery · video
“the blade on the CX is 154 CM stainless steel uh this is a high carbon stainless steel and it's supposed to hold its Edge…” 8541 Tactical · video
“it's got a really high quality blade still actually better than most of the pocket knives i've ever owned” Cedric & Ada Gear and Outdoors · video
-
One-handed opening and closing mechanism works well 4 · recurring
“it's easy enough to open with one hand no problem at all” Nick Shabazz · video
“opening this one can be operated fully with one hand” River's Edge Cutlery · video
“you can flip it out one-handed without any problem and you can close it up one-handed without any problem at all” 8541 Tactical · video
“This one is actually made to open with just your finger” DFQ Reviews · video
-
Tool is lightweight and slim for easy carry 4 · recurring
“so it's a pretty easy to carry multitool” River's Edge Cutlery · video
“one of the reasons is because of how light and slim uh it is” David Jaski · video
“the skelet tool CX comes in at a really lightweight 5 oz so it's a Nifty little tool that you can carry just about anywhere” 8541 Tactical · video
“it's very sleek, low profile” DFQ Reviews · video
-
Overall build quality, fit, finish, and materials are high 4 · recurring
“overall the fit and finish is excellent” 8541 Tactical · video
“The build quality is great” DFQ Reviews · video
“yeah just really high quality construction” Cedric & Ada Gear and Outdoors · video
“good quality” u/loogojoost · reddit
-
Bit driver has a secure retention system preventing loss 3 · recurring
“the bit driver is actually do have the lock for the bit” Nick Shabazz · video
“they swap out very quickly and very easily” 8541 Tactical · video
“i really do enjoy this retention system” Cedric & Ada Gear and Outdoors · video
-
Pliers are strong, precise, and comfortable to use 3 · recurring
“these pliers work very well uh they're strong” David Jaski · video
“I got just a little bit of flex when we pre-loaded them but no bending no permanent damage to them no twisting side to side…” 8541 Tactical · video
“they'll go quite easily through normal while like that and then this is some thicker gauge um thicky aged galvanized wire that i use the…” Cedric & Ada Gear and Outdoors · video
-
Liner lock is secure and functions reliably 2 · repeated
“the blade locks and it actually locks up pretty securely” Nick Shabazz · video
“it's got a liner lock for safety and it works really well” River's Edge Cutlery · video
-
Carabiner clip serves as a bottle opener 2 · repeated
“there's also a carabiner right here that can also work as a bottle opener” River's Edge Cutlery · video
“one added feature of this Carabiner clip is it actually works very well as a bottle opener” 8541 Tactical · video
-
Ergonomics and handling comfort are good 2 · repeated
“it's really comfortable to hold” David Jaski · video
“it's very very comfortable as a knife” Cedric & Ada Gear and Outdoors · video
-
Aesthetic appearance and design are attractive 2 · repeated
“it's just a really nice accent it's really attractive and it uh sets off the rest of the tool” 8541 Tactical · video
“I just love the look of it” DFQ Reviews · video
-
Tool is suitable for everyday carry and general use 2 · recurring
“it is a great option for everyday carry” River's Edge Cutlery · video
“had everything I needed” u/loogojoost · reddit
-
Overall positive impression of the tool 2 · repeated
“this is a competent enough knife” Nick Shabazz · video
“i think this is uh one of the best tools that they that leatherman has made” David Jaski · video
-
Price is high relative to function or competitors 3 · recurring
“the skelet tool is only 20 bucks less” Nick Shabazz · video
“$90, maybe a little bit steep” DFQ Reviews · video
“you get the least amount of tools for your money” Cedric & Ada Gear and Outdoors · video
-
Pocket clip orientation causes pocket folding or sits poorly 2 · repeated
“the knife is tipped down only when it's clipped into the pocket” Nick Shabazz · video
“i find it's a bit bit sort of side heavy and when you put it on your pocket it folds the pocket over on itself” Cedric & Ada Gear and Outdoors · video
-
Screwdriver function is awkward, tricky, or weak 2 · repeated
“if you always need a screwdriver oh my God you do not want to use this that often” Nick Shabazz · video
“it's not obviously a heavy-duty screwdriver at all” Cedric & Ada Gear and Outdoors · video
Knife blade is sharp and cuts effectively Warranty coverage is excellent DLC finish is tough, scratch, and corrosion resistant Tool is smaller than comparable bench knives Knife blade is too short for some users Mechanism is difficult to operate or feels stiff Carabiner attachment is unnecessary or illogical Tool is too heavy for belt loop carry
- The Leatherman Skeletool CX Multitool: The Full Nick Shabazz Review
- Leatherman Skeletool CX MultiTool Overview
- 4 years daily use / carry Leatherman Skeletool CX Review
- Leatherman Skeletool CX Review
- Is the Leatherman Skeletool CX Worth $90? | Compact EDC Multitool Review
- Leatherman Skeletool CX review by CedricAda
- Lost my Skeletool CX
Problems owners reported
-
Pliers broke, bent or went loose 6 owners
“I've had the pliers replaced once because they broke.” u/rival_22 · r/Leatherman · 2026-08-09
“something in the plier function broke” u/odd-acanthaceae-7202 · r/Leatherman · 2026-06-20
“the pliers and entire skeletool have been bent from use of the bit-driver” u/mickeytanner · r/Leatherman · 2026-04-14
“I snapped the pliers” u/danielsweeney25 · r/Leatherman · 2025-11-22
“I've had this tool sent in for warranty twice over broken pliers.” u/halftrack_el_camino · r/Leatherman · 2023-10-20
“broke the pliers trying to twist some heavy-gauge wire shelving” u/jm2084 · r/Leatherman · 2019-04-30
-
Rust or corrosion 5 owners
“remove rust on the Skeletool CX” u/dy1p1ck1le · r/Leatherman · 2026-05-01
“Skeletool cx rust just from carrying in pocket after 3 months.” u/classic_chipmunk3185 · r/Leatherman · 2025-06-21
“rust developing on the bits for the screwdriver” u/pizzasplice · r/Leatherman · 2024-08-01
“it accumulated a LOT of rust” u/redratus · r/multitools · 2023-08-03
“Is my multitool rusting already?” u/ssyntaxx · r/Leatherman · 2021-08-09
-
Pocket clip broke, loosened or fell off 3 owners
“broke the pocket clip” u/loganloggingon08 · r/Leatherman · 2025-08-20
“accidentally broke the clip” u/opeboi · r/Leatherman · 2023-01-28
“Skeletool CX, Bent Pocket Clip” u/madmonk13 · r/Leatherman · 2018-05-12
Counted from 59 Reddit posts naming the Skeletool CX in r/multitools and r/Leatherman, searched 2026-09-28. A number here counts owners who posted about a problem with their own tool, not how often the problem occurs: each search returns a capped number of posts, and comments were not read. A problem is listed once 3 different owners report it.
Where this data comes from
27 source records back this page. 5 fields could not be verified against any of them and are shown as — above.
Show the 27-row source table
| Weight | leatherman.com Leatherman publishes 5 oz; converted at 28.349523125 g/oz. | Manufacturer page | 2026-09-30 |
| Closed length | leatherman.com Leatherman publishes 4 in. Leatherman publishes imperial only; converted at 25.4 mm/in. | Manufacturer page | 2026-09-30 |
| Open length | leatherman.com Leatherman publishes 6 in. Leatherman publishes imperial only; converted at 25.4 mm/in. | Manufacturer page | 2026-09-30 |
| Width | leatherman.com Leatherman publishes 1.24 in. Leatherman publishes imperial only; converted at 25.4 mm/in. | Manufacturer page | 2026-09-30 |
| Thickness | leatherman.com Leatherman publishes 0.52 in overall thickness. Leatherman publishes imperial only; converted at 25.4 mm/in. | Manufacturer page | 2026-09-30 |
| Manufacturer tool count | leatherman.com Leatherman states a tool count of 7. | Manufacturer page | 2026-09-30 |
| Tool list | leatherman.com Mapped from the manufacturer tool list on the product page; manufacturer wording and order are preserved. | Manufacturer page | 2026-08-26 |
| Tool list | leatherman.com Phillips screwdriver from the included bits: Phillips #1 & #2; Screwdriver 1/4" & 3/16" | Manufacturer page | 2026-10-03 |
| Blade steel | leatherman.com Product page specification "Blade Material: 154CM Stainless Steel". | Manufacturer page | 2026-09-30 |
| Blade steel | leatherman.com states 154CM Stainless Steel Disagrees with the accepted value "154CM stainless steel". Page states: "Blade Material
154CM Stainless Steel" | Manufacturer page | 2026-08-26 |
| Blade length | leatherman.com Leatherman publishes a primary blade length of 2.6 in. Leatherman publishes imperial only; converted at 25.4 mm/in. | Manufacturer page | 2026-09-30 |
| MSRP (USD) | leatherman.com List price on leatherman.com, USD. | Manufacturer page | 2026-09-30 |
| Production status | leatherman.com Listed and in the current catalogue on leatherman.com. | Manufacturer page | 2026-08-26 |
| Sheath included | leatherman.com Product description states "Sheath sold separately." | Manufacturer page | 2026-09-30 |
| Pocket clip | leatherman.com Listed as a product feature: "Replaceable Pocket Clip". | Manufacturer page | 2026-09-30 |
| Replaceable cutters | leatherman.com Tool list names plain "Wire Cutters" and "Hard-wire Cutters", not the "Premium Replaceable" cutters Leatherman names on the Wave Plus, Rebar, Surge and Super Tool 300. | Manufacturer page | 2026-08-26 |
| Country of manufacture | leatherman.com states USA Page states: "Made in the USA -" Site-wide footer text, printed on every page of the site; not a statement about this product. Refused 2026-09-30. | Manufacturer page | 2026-09-28 |
| Edge type | leatherman.com Page states: "Blade Edge
Plain" | Manufacturer page | 2026-09-30 |
| Blade locking | leatherman.com Page states: "Blade Lock
Yes" | Manufacturer page | 2026-09-30 |
| One-hand opening | leatherman.com Page states: "One-hand Operable Features
Open and use features with one hand, keeping your other hand free when you need it most." | Manufacturer page | 2026-09-30 |
| Outside-accessible blade | leatherman.com Page states: "Outside-Accessible Features
Access essential tools without opening the multi-tool, even while it remains folded." | Manufacturer page | 2026-08-26 |
| Wire cutters | leatherman.com Page states: "03 Wire Cutters" | Manufacturer page | 2026-09-30 |
| Hard-wire cutters | leatherman.com Page states: "04 Hard-wire Cutters" | Manufacturer page | 2026-09-30 |
| Blade profile | leatherman.com Official specification states 'Blade Type: Modified Drop Point'. | Manufacturer page | 2026-09-01 |
| Pliers type | leatherman.com Official tool list includes both needlenose and regular pliers. | Manufacturer page | 2026-09-30 |
| Included bits | leatherman.com Page states: "Included Bits * Phillips #1 & #2 * Screwdriver 1/4" & 3/16"" | Manufacturer page | 2026-09-30 |
| Warranty | leatherman.com Page states: "That’s why we offer our 25-year warranty, so you can be confident your Leatherman lasts for a lifetime." | Manufacturer page | 2026-09-30 |
Not verified: Release year, MSRP (EUR), Lanyard attachment, Crimper, Country of manufacture. Each renders as — above. We would rather show a gap than a number nobody stands behind.
Heavier than 58% of the database. 112 tools match or beat its tool count at a lower weight.
See lighter alternatives →Leatherman models in the database, with the same fields measured the same way.
All Leatherman multitools →